Legacy I Effects loop Question (Solved)

The name says it all! Discuss Steve's studios, your studios and gear set-ups, amps and effects here. This is not for discussing guitars (Steve's or otherwise).
Post Reply
Message
Author
StratVibe
Newcomer
Posts: 7
Joined: Wed Aug 06, 2014 3:34 pm

Legacy I Effects loop Question (Solved)

#1 Post by StratVibe » Wed Aug 06, 2014 3:39 pm

Got a used Legacy I today, love the tone and it's an amazing amp for what I want to hear. :D

I have some TC Electronics pedals and I put the time based pedals in the effects loop. When I have them all off I get a very thin 1/4th of the normal volume coming through and when I engage one of them (any one of them) it shuts the sound off completely...

Any suggestions where to start looking?

Thanks
Last edited by StratVibe on Sun Apr 19, 2015 10:43 pm, edited 1 time in total.

paulh123
Member
Member
Posts: 192
Joined: Wed Mar 30, 2011 12:16 pm
Location: reading,england

Re: Legacy I Effects loop Question

#2 Post by paulh123 » Thu Aug 07, 2014 2:24 am

hi,
if your sure alll the pedals are fine then there must be a problem with the fx loop on the amp,first check the preamp tube v3 which half the tube is for the fx return the other half is for the clean channel)the fx send is solid state not tube.
if thats not the problem i guess further investigation will be required,ie a tech if your not able to fix it yourself.

Post Reply