Mesa boogie question...

The name says it all! Discuss Steve's studios, your studios and gear set-ups, amps and effects here. This is not for discussing guitars (Steve's or otherwise).
Post Reply
Shade
Member
Member
Posts: 350
Joined: Fri Apr 08, 2005 1:43 pm

Does anyone know if it would be possible to use a dual rectifier with a single two 12 cabinet? I know I'd have to match the OHM or whatever, but my main concern was the wattage-issue. The speakers would probably be vintage 30s, and those are 60 watt speakers, so yeah.

Thanks in advance.
Real_Confusions
Member
Member
Posts: 918
Joined: Sun Jun 05, 2005 10:47 am

I don't see any problem.
Shade
Member
Member
Posts: 350
Joined: Fri Apr 08, 2005 1:43 pm

Alright, I didn't think so but just wanted to be sure, thanks :).
j.arledge
Member
Member
Posts: 1494
Joined: Fri Jun 25, 2004 10:38 am

yeah no problems at all . I belive that duals have a 16 ohm output , i know some mesas didn't and still dont come with 16 ohm output only 4 and 8 .like my mark 3 which ment i had to rewire my legacy cab to run at 4 ohms instead of 16.
User avatar
jemgirl
Member
Member
Posts: 2970
Joined: Sun Jul 04, 2004 1:21 pm

there shouldn`t be a problem!
on my mesa,for instance,a cabinet is hooked-up with a 8ohm speaker the output on my mesa is 4ohm.....sounds wonderful!!
Post Reply