Bill & Ted air guitar - Paf Pro and ISCV2?

Discuss Steve's guitars, set-up and equipment here. This forum is not for discussing general guitar topics.
Post Reply
Message
Author
Elvisish
Newcomer
Posts: 2
Joined: Sun Aug 14, 2016 10:27 pm

Bill & Ted air guitar - Paf Pro and ISCV2?

#1 Post by Elvisish » Sun Aug 14, 2016 10:34 pm

As I'm sure like many Vai fans, I'm an old Bill and Ted fan and I think he was using the Jem that had a Paf Pro in bridge and neck and a singlecoil ISCV2 in the middle around this time, has he confirmed which guitar/pickups used around the time of recording the soundtracks to both movies?

User avatar
Unicornex
Newcomer
Posts: 7
Joined: Sun Apr 10, 2016 12:32 pm
Location: Sabadell/Barcelona/Spain

Re: Bill & Ted air guitar - Paf Pro and ISCV2?

#2 Post by Unicornex » Sat Aug 20, 2016 7:29 am

Dont know but the Middle pickup is not Iscv2, the older jems has the iscv1 or jem single witch is basicaly a dp110 moded

Elvisish
Newcomer
Posts: 2
Joined: Sun Aug 14, 2016 10:27 pm

Re: Bill & Ted air guitar - Paf Pro and ISCV2?

#3 Post by Elvisish » Sat Aug 20, 2016 9:48 am

Unicornex wrote:Dont know but the Middle pickup is not Iscv2, the older jems has the iscv1 or jem single witch is basicaly a dp110 moded
I can't seem to find an iscv1 anywhere, nor can I a Jem single, is the iscv2 close enough? Or is there something currently available that would be?

User avatar
Unicornex
Newcomer
Posts: 7
Joined: Sun Apr 10, 2016 12:32 pm
Location: Sabadell/Barcelona/Spain

Re: Bill & Ted air guitar - Paf Pro and ISCV2?

#4 Post by Unicornex » Sat Aug 20, 2016 3:05 pm

Jem single, or ISCV1 are not for retail market, Paul Gilbert models had dp110 and in the 1996 Was Changed for the jem single so i think its close. With PAF pros you can combine the hs-2 dp116 in no hum wire, only single mode red and White and this is the closest sound that have to the jem single. Look at DiMarzio page. In the catáloGS apears the dp110 number so. I m not expert, but i think that this people can confirm.http://www.ibanez.com/anniversary/expan ... =137&now=1

Uni.

pagliai
Member
Member
Posts: 804
Joined: Wed Dec 31, 2003 7:45 am
Location: Italy
Contact:

Re: Bill & Ted air guitar - Paf Pro and ISCV2?

#5 Post by pagliai » Wed Jan 11, 2017 8:49 am

The wires are RED and BLACK ,HS2 ,unicornex is correct cheers sir
Hope this helps

Post Reply