Does anyone know what kind of push-pull pot's Steve Vai is using in his guitars? Please take a look at the video below starting at 1:05 in the following link:

http://www.youtube.com/watch?v=WQVcFj7MIJA

In the video Steve is talking about his custom push/pull pot with a special capacitor that filters out the bottom end when you pull the volume knob at lower volumes. What capacitor and brand push/pull potentiometer do you think he is using?

Thanks!

i think all jems and most ibanez guitars already have capacitors on the volume knob to bleed the high frequencies in when you roll back the volume

if you have an ibanez rg- look at the volume pot if something is attached to it like the tone- you have it too

its pretty common on ibanez

as to what the thing does- i don't know

You, uh, answered your own question well before you asked it .. it's a high pass filter.

what?

you know the thing that is wired into the guitar that the knob attaches to is called a potentiometer right?

[img][img]http://imageshack.us/a/img543/4755/imageiau.jpg[/img]

i bet his guitar has a high pass filter on the volume BUT i bet its always on
its pretty standard in ibanez guitars

The pot,
It seems a ALPHA 500kB push pull